Expert Answers about Chrysler Air Intake Filter
- Will The Edge Jammer Cold Air Intake Work With An Exhaust Brake On A Dodge 5.9L Cummins Engine
- The Edge Jammer Cold Air Intake with Pre-Oiled Air Filter part # EP38225 is designed to fit a 1994-2002 Dodge Ram with the 5.9l turbocharged diesel engine. As the Banks exhaust brake works to compress the exhaust gasses (hot side) not the intake flow (cold side), it should have no compatibility issues with the Edge cold air intake as long as your turbocharger remains in the factory location. Therefore, yes, the Edge cold air intake will work with the Banks exhaust brake.
This is a great...
view full answer... - Correct Airaid Cold Air Intake System for a 2007 Chevrolet Suburban with 5.3L
- The correct Airaid Cold Air Intake System for a 2007 Chevrolet Suburban with 5.3L is part # AR201-267 which I confirmed with Airaid but only if you have electric radiator cooling fans. If you do not have electric radiator cooling fans then you could use the Airaid CAD Cold Air Intake System with SynthaMax Dry Filter part # AR201-196 but this is your only option as they don't offer a full system for models without the electric radiator cooling fans.
view full answer... - Recommended Cold Air Intake for a 2017 Ford F-150
- For your 2017 Ford F-150 with the 5.0L coyote engine, I recommend taking a look at the Airaid MXP Cold Air Intake System part # AR401-293. The Airaid intake improves airflow to the engine which results in a power increase up to 19 HP and 26 TQ. The enclosed air box blocks out heat from the engine to maximize cold air draw.
In addition to improved airflow, the dry 2-layer filter works to prevent 99.6% of contaminants from entering the engine. The intake easily installs using the factory...
view full answer... - The Best Cold Air Intake for a 2010 Ford F-150 with 4.6 Liter, 2 Valve Motor
- I spoke with my contact over at Air Raid about intake system # AR400-226. He said that it fits both the 2 valve and 3 valve versions of the 4.6 liter engine in the 2010 Ford F-150. So you will be good to go!
To keep the filter oiled and clean you can use kit # AR790-551. And if you ever need to replace the filter use # AR721-473.
view full answer... - Is Airaid CAD Cold Air Intake System with SynthaMax Dry Filter CARB Compliant
- The Airaid CAD Cold Air Intake System with SynthaMax Dry Filter part # AR402-246 iw California compliant on certain vehicles. It looks like you may have a 1999 Ford F-250 or F-350 Super Duty, as long as it's a 7.3L V8 Diesel Engine it is compliant.
view full answer... - Recommended Cold Air Intake for a 2017 Ram 1500 w/ a 5.7L Hemi Engine
- Yes, it will. The Edge Jammer Cold Air Intake with Dry Air Filter item # EP384140-D is designed to fit the 5.7L Hemi engine in your 2017 Ram 1500.
view full answer... - Do Headers have to be Installed to Add Cold Air Intake on a 2006 Chevy Silverado with 6.0 Liter
- When upgraded parts people will usually upgrade headers along with adding cold air intake but you do not have to upgrade headers to be able to install just cold air intake. So in other words you can install just cold air intake # AR200-247 if you want.
This particular model will fit your 2006 Chevy Silverado with 6.0 liter motor as long as it has a belt-driven radiator fan. For models with electric fans use # AR200-251.
The filter will need to be cleaned periodically so I recommend Airaid...
view full answer... - Is Airaid ATV-UTV Air Filter # AR700-495 a Correct Fit for 2007 Honda TRX680 4-Wheeler
- My contact at Airaid checked the air filters specified for your 2007 Honda TRX680 4-Wheeler and based on his research a better filter option for your ATV is their # AR700-493. This filter has a 3-inch flange to mate with your intake, a base diameter of 6-inches, a top diameter of 4-5/8-inches and a height of 6-inches. If these dimensions match your current filter then this one should be a good fit.
Since these filters are NOT vehicle-specific you'll need to check the measurements of your...
view full answer... - Will Adding a Cold Air Intake with a Performance Tuner Help my 2016 Ford F-150 5.0L V8 Engine
- The Edge Gas Evolution CTS2 Performance Tuner part # EP85450 can be installed on your 2016 Ford F-150 without supporting modifications. However, in order to receive the full benefit of the tuner, I recommend adding a cold air intake such as the Airaid MXP Cold Air Intake System with SynthaFlow Oiled Filter part # AR400-293.
A cold air intake will work extremely well with a performance tuner. When customers seek to increase performance and improve fuel efficiency, the above two products...
view full answer... - Compatibility and Fit of Airaid Cold Air Intake System for 2014 Jeep Grand Cherokee
- For your 2014 Jeep Grand Cherokee the Airaid CAD Cold Air Intake System with SynthaMax Dry Filter - Stage 1 - Open # AR311-212 is a fit for the 3.6L and 5.7L models but not the 6.4L models. I confirmed this with the manufacturer and will update our fit guide. As long as you have the 3.6L or 5.7L this will work well for you. This is a fit for 2011-2018 model years with those engine sizes.
This system will give you increases of up to 16 horsepower and up to 14 ft lbs torque.
view full answer... - Will Superchips Flashpaq Tuner Fit a 2003 Ford Ranger 3.0 Liter w/Cold Air Intake and 33 Inch Tires
- The Superchips Flashpaq tuner # SU1845 will fit your 2003 Ford Ranger with 3.0 liter motor. Superchips estimates power gains up to 16 horsepower and 17 feet pounds of torque. This tuner does have a mode called Mileage XS SAVE to help the truck achieve better gas mileage. The tuner is also compatible with aftermarket cold air intake and can be calibrated to account for the different tire size.
view full answer... - Can I Use The Airaid MXP Cold Air Intake System Without Having To Re-Tune My 2019 Ford F-150?
- The Airaid MXP Cold Air Intake System # AR401-293 leaves space for the the factory sensors to connect to the new intake. This will make sure that there will be no codes thrown when you install and you will not need to recalibrate your ECU.
This will increase your fuel economy and make your engine much happier with the amount of air you will have going into your 2019 Ford F150's engine. Some cold air intakes do not have an enclosed box which makes it necessary to clean the filter out more...
view full answer... - Can a Programmer and Cold Air Intake be Used at the Same Time on a 2013 Ford F-150 5.0L
- Yes, you can use both cold air intake # AR402-299 and Flashpaq programmer # SU1845 together at the same time on your 2013 Ford F-150 with 5.0 liter motor. The intake has an estimated gain of up to 17 horsepower and the programmer up to 24.4 horsepower. But these figures don't stack meaning that using both doesn't necessarily mean that you will see a gain of 31.4 horsepower. It will likely be slightly less.
For a programmer with a larger display and comparable power gains you can use the...
view full answer... - Fit of Airaid # AR201-796 Cold Air Intake on 2010 Chevy Silverado 2500HD w/ 6.0L Engine
- Your 2010 Silverado did indeed come with a factory cold air intake. The Airaid # AR201-796 works with your existing box, and comes with the Dry 2-layer performance air filter and intake tube. The tube is specifically designed to allow the maximum amount of airflow into the engine.
The # AR201-796 is a confirmed fit for your 2010 Silverado. I've linked you to the installation instructions as well as to a product description video that you might find helpful.
view full answer... - Best Way To Increase Performance In A 2015 Ford F-150
- Yes, the Superchips Flashpaq F5 Performance Tuner part # SU1845 is a confirmed fit for your 2015 Ford F-150. The Flashpaq boosts your vehicle's horsepower (13 BHP) and torque (15 Ft. Lbs.). This tuner also offers several power levels and user-tunable options so you can get the most out of your engine. For example, using this tuner will allow you to adjust several different parameters such as fan speed, shift points, rev limiter, and speed limiter.
In order to receive the maximum performance...
view full answer... - Best Way To Increase Horsepower and Torque in a 2015 Ford F-150 with a 3.5L EcoBoost Engine
- The 3.5L turbocharged EcoBoost engine in your 2015 Ford F-150 can experience huge gains in horsepower, torque and fuel efficiency when paired with a performance tuner such as the Edge Gas Evolution CS2 Performance Tuner part # EP85350. The Edge CS2 comes preloaded with 4 custom tunes that will allow for your vehicle to see increases in horsepower, torque, and fuel economy up to 43 HP and 73 TQ respectively. In addition to increased performance, the Edge CS2 will allow you to adjust several...
view full answer... - Fit of Edge EP39125-D Performance Kit on 2008 Dodge Ram With 6.7L Cummins Diesel
- It certainly will. The Edge Performance # EP39125-D Kit w/ Evolution CTS2, Jammer Air Intake, and Exhaust - Dry Filter is specifically designed to work with your 6.7L Cummins.
This US made product is CARB approved if you happen to reside in California.
If you use the link, you can see other accessories for your 2008 Dodge Ram
view full answer... - How To Increase Horsepower And Torque In A 2008 Chevrolet Silverado 4.3L V6
- No, the Edge Insight CTS2 Comprehensive Gauge Display part # EP84130 will not boost the horsepower or torque that your 2008 Chevrolet Silverado has. The Edge Insight CTS2 is more of a supplemental gauge display. It will allow you to view data that is not normally accessible to the average person such as G-Force, EGT(Exhaust Gas Temperature), Boost PSI, and IAT (Intake Air Temperature).
In order to boost your vehicle's horsepower and torque ratings, you will want to use the Superchips Dashpaq...
view full answer... - Cold Air Intake for a 2010 Ford F-150 4.6 Liter 2-Valve
- The Airaid CAD Cold Air Intake System # AR401-226 will fit a 2010 Ford F-150 with 4.6L V8 Engine. Since that is what you have this system will work for you. I have also included a link to all of the cold air intakes we carry that will fit your 2010 Ford F-150 with 4.6 liter motor. The intakes will fit both the 2-valve and 3-valve versions of the 4.6.
view full answer... - Is Airaid Cold Air Intake Compatible with California's CARB Emissions Standards
- Yes. I checked with Airaid and cold air intake # AR201-235 for the 2009 Chevy Silverado is street legal in all US states. So the CARB standards won't affect this particular part or its use. Cold air intake makes the engine more efficient so it makes sense that CARB would not be a factor!
view full answer...
Go To Results